Fischer MS13 - programmable pressure switch transmitter

Working Principle:

MS13 is based rugged ceramic sensor element that is suitable for measuring over-pressure and under-pressure. The applied pressure deforms measuring membrane causing change in resistance on the attached measuring bridge. This change in resistance is mapped by electronic module and transformed into display, switch contacts or standard analog output signal.
The optional output signal can be dampened, spread, inverted and transformed via a table function even if it is non-linear. Overstepped limits can be visualised with LCD color change display.
The unit is configured with a keyboard or by means of remote configuration from PC.

Key Features:

• Configurable pressure display units
• 2 independent limit switches with many configuration options
• Analog signal output with possibility of characteristic curve spread, curve reversal and offset setting
• Characteristic curve implementation via table with max. 30 measuring points
• Complete configurable parameters and measuring point protocol possible through optionaltransmitterPC interface

Key Specifications:

• Relative pressure
  • Measuring range: 0 ~ + 1.6 bar to 0 ~ +60 bar
  • Overpressure: 4 bar ~ 200 bar
  • Burst pressure: 7 bar ~ 250 bar
  • Characteristics curve deviation: 0.5% FS or 1.0% FS
• Vacuum and ± measuring ranges:
  • Measuring range: 0 ~ (-) 1.0 bar to (-) 1 ~ +24 bar
  • Overpressure: 4 bar ~ 100 bar
  • Burst pressure: 7 bar ~ 150 bar
  • Characteristics curve deviation: 1.0% Full scale
• Permissible ambient temperature: -10° C ~ +70° C
• Permissible media temperature:  -10° C ~ + 70° C
• Protection class: IP65 per DIN EN 60529
• Non-linearity: < 1.0% full scale
• Hysteresis: < 0.5% full scale
• Power supply: 24 V AC/DC
• Analog output signal: (0) 4-20mA / 0-10V
• Output contacts: 2 potential free relay contact (32V AC/DC , 2A) or semiconductor switches (3~32 V AC/DC, 0.25A), configurable
• EMC: EN 61326-1:2013, EN 61326-2:2013
• Material (housing): stainless steel 1.4301
• Process connection (media contact): stainless steel 1.4404
• Measuring diaphragm: ceramic
• Display: 4..6 digit LCD, full graphic, color changing
• Configurable: attenuation, switching output, measuring range unit, output signal, zero point stability, implementation of characteristic curve, password

Application areas:

• Pump Control system
• pump and compressors monitoring
• Filling level measuring

Industrial areas:

• Process engineering
• Environment engineering
• Renewable energy eg. biogas etc
• Waste Water Engineering
• Effluent treatment
• Breweries, alcohol industry